Trusted Home Energy Audit for Enterprise Homeowners
If your summer power bills in Enterprise keep climbing while your rooms never quite cool down, the house is telling you something specific is wrong. A home energy audit finds it. We measure where conditioned air escapes, where heat pushes in through the attic, and where your ductwork leaks before it ever reaches a register. Our technicians have up to 15 years of experience reading those results and turning them into a short, prioritized plan instead of a sales pitch. We use diagnostic tools, not guesswork, and most audits are scheduled within a few days so you can stop paying for problems you can’t see. Call (844) 972-1736 and a live person answers, day or night.

What Our Home Energy Audit Service Includes
A home energy audit is a full diagnostic of how your house actually performs, not a walkthrough with a clipboard. In Enterprise, where summer highs push past 105°F and the monsoon season swings humidity hard in both directions, the leaks and weak spots that matter most are the ones you never notice until the bill arrives. We test four things on every audit, and each one points to a different fix.
Blower Door Test
A blower door is a calibrated fan mounted in an exterior doorway that depressurizes the whole house so we can measure exactly how much air leaks through gaps you can’t see. We run it when a home feels drafty, when rooms won’t hold temperature, or when you’re planning insulation work and need a baseline first. Your report shows the air changes per hour, which tells us whether the priority is air sealing, attic work, or both.
Thermal Imaging Inspection
We use an infrared camera to photograph temperature differences across walls, ceilings, and window frames, which reveals missing insulation, hidden air paths, and moisture that isn’t visible to the eye. This matters most in older Enterprise homes where insulation may have settled or been installed unevenly decades ago. The images become your map: every cold or hot patch gets flagged with its location so the repair is targeted, not guessed.
Insulation Inspection
We physically inspect attic and crawl space insulation to check depth, coverage, material condition, and whether it’s been disturbed by pests, water, or past repairs. If your attic insulation has settled below the level your climate calls for, you’re losing cooling dollars every hour in July. We measure what’s there, compare it to what Enterprise homes need, and tell you plainly whether a top-off with blown-in material or a full replacement makes more sense.
Duct Leakage Test
A duct leakage test pressurizes your duct system to measure how much conditioned air escapes before it reaches your rooms. In this part of the valley, ducts run through brutally hot attics, so a small leak wastes a surprising amount of cooling. We test when rooms feel uneven, when the system runs constantly, or when you’ve already sealed the house and want to know if the ducts are the remaining culprit.
We use trusted materials from names like CertainTeed and Rockwool when the audit leads to insulation work, and the 90-Day Done Right Promise backs whatever we install.
Brands We Service for Home Energy Audit
We work with homes insulated with Rockwool mineral wool, and we know how it holds up in a desert attic compared to fiberglass batts that sag under heat cycling. When your audit points to spray foam, we handle Icynene and Demilec systems and understand where each one performs best in walls and rim joists. We also read CertainTeed and Johns Manville blown-in installations closely, because depth and settled density tell us more about performance than the label on the bag.
Brand doesn’t change the diagnostic. It changes the recommendation. Whether you have Rockwool, Icynene, Demilec, CertainTeed, Owens Corning, Knauf, GreenFiber, or anything else in your walls and attic, we can help. Our job is to test the house as it stands and tell you what will actually lower your bills.
Signs You Need a Home Energy Audit Right Now
- Your power bill jumps every summer and keeps climbing. If your cooling costs outpace your neighbors in similar homes, the gap is usually leakage or weak insulation, and both show up clearly in an audit.
- Some rooms never get comfortable. A bedroom that’s hot while the living room is fine points to duct leakage or missing insulation on a specific wall, which thermal imaging pinpoints in minutes.
- You feel drafts or see dust collecting at outlets and trim. Air moving through small gaps carries dust with it, and those same gaps leak the cooling you paid for.
- Your attic insulation looks thin, uneven, or disturbed. Settled or patchy insulation lets heat pour straight down into your ceilings through the hottest hours of the day.
- You’re planning a renovation or just bought an older home. Auditing first means you insulate and seal once, correctly, instead of opening the same walls twice.
Our Home Energy Audit Process – Step by Step
- 1
Walkthrough and conversation. We start by asking what bothers you most: bills, hot rooms, dampness, or drafts. That context shapes where we look hardest.
- 2
Blower door and duct testing. We set up the blower door and pressurize the ducts so every leak shows up as a measured number, not an opinion.
- 3
Thermal imaging sweep. We photograph walls, ceilings, and attic surfaces with an infrared camera to catch hidden gaps and missing insulation.
- 4
Attic and crawl space inspection. We measure insulation depth, check for moisture and pest damage, and note how sealing work would need to be staged.
- 5
Your written report and plan. You get the test results, the images, and a prioritized list of fixes with costs up front, so you can act now or plan the work in stages.
When the audit points to attic work, we move straight into home performance improvements like air sealing and insulation, often in the same visit.
How Much Does Home Energy Audit Cost in Enterprise?
Most comprehensive home energy audits in Enterprise run about $250 to $450, depending on square footage, how many stories your house has, and whether we test the duct system separately. A blower door test on its own typically runs $150 to $250. Thermal imaging alone is often bundled for $100 to $175 when it’s part of a full audit, and duct leakage testing runs about $150 to $300 for an average home.

Complexity drives the price: multi-zone HVAC systems, finished attics, and crawl spaces with limited access take longer to test properly. You avoid overpaying by asking for results in plain numbers and a written summary, not just a verbal sales talk. Our estimates are free and upfront, and the standing discounts include $50 Off Any Repair Over $250 and an $89 Seasonal Tune-Up. Call (844) 972-1736 for an exact quote, and we’ll tell you exactly what the audit will cover before we start.
Home Energy Audit Near Enterprise – Our Service Area
We serve homeowners throughout Enterprise and the surrounding valley, including Spring Valley, Paradise, Summerlin, Winchester, and Henderson. Response times are typically quick, with most audits scheduled within a few days. If you’re in a nearby community and want the same diagnostic approach, take a look at our Home Energy Audit in Spring Valley page to see how we work in neighboring areas.
Serving Enterprise, NV – Our Local Coverage Area
We serve Enterprise and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Home Energy Audit in Enterprise
A home energy audit is a diagnostic test that measures how much air and cooling your house loses and where it happens. We combine blower door testing, thermal imaging, insulation inspection, and duct leakage testing, then give you a written report with prioritized fixes. It tells you what to repair first so you stop guessing and start saving.
Most audits take two to three hours, depending on the size of your home and whether we test the ducts separately. Larger houses or ones with tricky crawl space access can run a bit longer. You get your findings the same visit.
A typical audit here runs $250 to $450, with duct testing and thermal imaging factored in. Price depends on square footage, stories, and system complexity. Call (844) 972-1736 for a free estimate and we’ll give you an exact number before we start.
Yes, we evaluate homes with Icynene and Demilec spray foam and know where those systems typically need attention. If the audit shows foam that was applied unevenly or an area that was skipped, we’ll point it out. Call us to talk through your setup.
Same-day scheduling is often possible, and our phones are answered by a live person 24/7, so you’ll never hit voicemail. If your home has a serious comfort or moisture problem, call (844) 972-1736 and we’ll find the soonest opening. Most jobs are completed in a single visit.
Yes. Every job is backed by our 90-Day Done Right Promise: if the work isn’t right, we make it right. Our technicians are background-checked, uniformed, and licensed and insured on every job. That written commitment is how we stand behind the results.
Clear access to your attic hatch and any crawl space opening, and have your last few power bills handy so we can compare usage. Close your windows and doors before we arrive so the blower door test reads accurately. That’s it, and we’ll walk you through the rest.
Schedule Your Home Energy Audit Service in Enterprise Today
Stop paying for cooling you’re losing through your attic and ducts. A home energy audit gives you the real numbers and a plan you can act on. Our technicians are background-checked and uniformed, pricing is upfront, and the 90-Day Done Right Promise backs every job. Call (844) 972-1736 for a free estimate, and if you’re nearby, see our Home Energy Audit in Paradise page for that area.
Written by the team at Warmline Insulation Co.