Trusted Wall Insulation for Enterprise Homeowners
If your back bedroom runs 8 degrees hotter than the front of the house, or your utility bill climbs every July while the thermostat stays put, your walls are likely the culprit. In Enterprise, where summer afternoons push past 105°F and the sun bakes west-facing walls for hours, an uninsulated or settled wall cavity turns your home into a slow oven. Our technicians have up to 15 years of experience diagnosing exactly this problem, and most wall insulation jobs are completed in a single visit. We’re licensed and insured, we send background-checked, uniformed technicians to every home, and a live person answers the phone 24/7. Call (844) 972-1736 for a free estimate.

What Our Wall Insulation Service Includes
Injection Foam Wall Insulation
Injection foam is the fix for finished walls you don’t want to tear open. We drill small holes between the studs, pump in expanding foam that fills the cavity completely, then patch and texture so you’d never know we were there. You need it when a rooms-over-garage addition or an older stucco home has hollow-sounding exterior walls and no existing cavity insulation. For Enterprise homes with finished interiors and block or stucco exteriors, this is usually the least disruptive route, and we use Icynene and Demilec foams that expand to seal the small gaps other materials miss.
Drill & Fill Wall Insulation
Drill-and-fill works best on walls with open cavities and no insulation: we bore small holes from the exterior or interior, blow in loose fiberglass or cellulose until the cavity is packed to the right density, then plug and finish each hole. It’s the right call when you want reliable thermal performance on a budget, or when a home energy audit shows a large stretch of uninsulated wall. We use GreenFiber and Johns Manville blown materials and check density as we go, because under-filled cavities settle and leave cold spots within a season.
Exterior Wall Insulation
Exterior wall insulation means adding a continuous layer of rigid board or spray foam on the outside of the framing, then re-cladding. It’s the answer when you’re already re-stuccoing, replacing siding, or dealing with a wall that gets direct afternoon sun and never cools down. This is the highest-performance option because it stops heat at the sheathing instead of just slowing it through the cavity. We work with Rockwool and CertainTeed rigid products and coordinate the finish work so your exterior looks right when we’re done.
Interior Wall Soundproofing
Soundproofing tackles noise between rooms, between floors, or from a shared wall with a neighbor. We install mineral wool batts and acoustic sealant in the wall cavities, which cuts airborne sound far better than standard batt insulation. If you work from home or have a teenager with a drum kit, this is money well spent. Rockwool’s mineral wool is our go-to for interior acoustic work in Enterprise because it’s dense, fire-resistant, and holds up in the dry desert air.
Brands We Service for Wall Insulation
We work with Rockwool mineral wool on acoustic and fire-rated wall applications, and we know how their batts behave in tight stud bays where standard fiberglass has to be compressed. We also install CertainTeed rigid board and fiberglass products, and we’re familiar with how their facings and vapor performance hold up in our dry climate. On the foam side, Icynene and Demilec both appear in our injection work, and we’ve learned which formulation suits which cavity depth and temperature range.
Each brand has its own quirks: Rockwool needs careful cutting to avoid gaps at the studs, CertainTeed board needs the right fastening pattern on stucco, and the foams cure differently depending on ambient heat. Our technicians have up to 15 years of experience with these materials, so we pick the one that fits your wall assembly rather than forcing one product onto every job. Whether you have Rockwool, CertainTeed, Icynene, Demilec, or any other make in your walls, we can help.
Signs You Need Wall Insulation Right Now
- Your energy bill spikes every summer. If your cooling costs climb faster than your neighbors’ on similar homes, heat is likely pouring through under-insulated walls. In Enterprise, west- and south-facing walls take the worst of it from noon to sunset.
- One room is always hotter or colder than the rest. Uneven temperatures across rooms usually point to gaps in the wall assembly, not a failing AC. A quick wall check tells us where the heat is getting in.
- You can hear your neighbor’s TV through a shared wall. Thin or empty cavities let sound travel straight through. Soundproofing the wall fixes the noise and often improves thermal performance at the same time.
- Exterior walls feel warm to the touch in the afternoon. If an interior wall surface reads noticeably warmer than the air in the room, the cavity behind it is probably empty. That stored heat radiates into your living space all evening.
- You’re renovating or re-stuccoing. The cheapest time to insulate a wall is while the finish is already off. Adding exterior insulation during a re-stucco project costs a fraction of doing it as a standalone job later.
Our Wall Insulation Process – Step by Step
- 1
Free assessment and thermal imaging. We walk the home with a thermal camera and a moisture meter to find exactly where the walls are losing heat. You’ll see the images yourself, so the recommendation isn’t guesswork. This is the same diagnostic approach we use in our home energy audits.
- 2
Wall cavity inspection. We check cavity depth, look for existing insulation, and confirm there are no hidden obstructions like fire blocking or wiring runs that would complicate the job. This step decides whether injection, drill-and-fill, or exterior board is the right fit.
- 3
Upfront written pricing. You get a clear, itemized quote before any work begins. No surprises on the invoice, and most jobs are completed in a single visit.
- 4
Installation with the right material for the cavity. We install foam, blown fiberglass, mineral wool, or rigid board depending on what the wall needs, sealing gaps as we go. All materials come from trusted manufacturers and are installed to the density the product requires.
- 5
Finish and walkthrough. We patch, plug, and finish each hole or exterior penetration, then walk the home with you to confirm the result. Every job is backed by our 90-Day Done Right Promise: if it’s not done right, we make it right.
How Much Does Wall Insulation Cost in Enterprise?
Wall insulation pricing in Enterprise depends on the wall area, the access method, and the material, but here are realistic ranges for the most common scenarios:
| Service | Typical Cost Range | What Drives the Price |
|---|---|---|
| Injection foam, per finished wall | $1,200 – $2,800 | Wall square footage, number of holes, patching |
| Drill-and-fill, whole home exterior walls | $1,800 – $4,000 | Cavity depth, exterior finish type, home size |
| Exterior rigid insulation, per wall section | $2,500 – $6,000 | Board thickness, re-stucco or re-siding work |
| Interior soundproofing, per room | $900 – $2,200 | Wall count, mineral wool vs. batt, finish work |
The biggest single cost driver is access: finished interior walls and stucco exteriors take more labor than exposed framing. Two-story homes and walls with fire blocking add time, and taking a job in phases often costs more per phase than doing it in one visit. To avoid overpaying, get the diagnostic assessment first so you’re not insulating walls that don’t need it, and ask for the itemized quote so materials and labor are separate line items. Every free estimate from us includes the thermal scan, a written scope, and an upfront price. Standing offers like $50 Off Any Repair Over $250 and our permanent 5% Senior & Veteran discount apply, and the quote you sign is the price you pay. Call (844) 972-1736 for an exact figure.

Wall Insulation Near Enterprise – Our Service Area
We serve Enterprise and the surrounding Las Vegas Valley, including Spring Valley, Paradise, Summerlin, Winchester, Henderson, Whitney, Sunrise Manor, Las Vegas, North Las Vegas, Boulder City, and Sandy Valley. Most Enterprise jobs are scheduled within a few business days, and our live phone line is open 24/7. If you’re weighing options in a nearby neighborhood, see our Wall Insulation in Spring Valley page or our Wall Insulation in Paradise page.
Serving Enterprise, NV – Our Local Coverage Area
We serve Enterprise and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Wall Insulation in Enterprise
Wall insulation is thermal material installed inside the cavities of exterior or interior walls to slow heat flow and reduce sound transfer. In Enterprise, it’s one of the most effective upgrades for cutting cooling costs because so much heat enters through sun-exposed walls. It works alongside attic insulation to complete the home’s thermal envelope.
Most wall insulation jobs take one day. A single wall with injection foam can be finished in two to four hours, while whole-home drill-and-fill or exterior board work typically runs a full day. Because most jobs are completed in a single visit, you won’t be living with open patched holes for a week. We’ll confirm the timeline in your free estimate.
Injection foam typically runs $1,200 – $2,800 per finished wall, drill-and-fill whole-home work runs $1,800 – $4,000, and exterior rigid insulation with re-cladding runs $2,500 – $6,000. Interior soundproofing usually lands between $900 and $2,200 per room. Call (844) 972-1736 for an exact quote; estimates are free and include a thermal scan.
Yes. We install Rockwool mineral wool and CertainTeed rigid and batt products regularly, and we also handle Icynene and Demilec injection foams. Our technicians know how each product performs in the dry desert climate, so you get the material that fits the wall rather than a one-size-fits-all recommendation. Whether your walls have these brands or any other make, we can work with them.
Our phone line is answered by a live person 24/7, so you can reach us any time for an urgent issue. Wall insulation isn’t usually an emergency, but storm damage or a sudden pest gap can create one. Call (844) 972-1736 and we’ll assess the situation and schedule as quickly as possible.
Yes. Every wall insulation job is covered by our 90-Day Done Right Promise: if the work isn’t done right, we make it right. We’re licensed and insured, and our technicians are background-checked and sent in uniform. The promise is written, not a verbal handshake.
Clear access to the walls being insulated, including moving furniture away from interior walls, and let us know about any recent water damage or pest issues. We’ll handle the rest, including patching and cleanup. If your home has a crawl space or attic work to bundle, those areas are often best addressed at the same time, so it’s worth mentioning them when you call. Call (844) 972-1736 to get scheduled.
Schedule Your Wall Insulation Service in Enterprise Today
Stop letting heat and street noise pour through empty walls. Call (844) 972-1736 for a free, no-obligation estimate on wall insulation. A live person answers 24/7, pricing is upfront, and most jobs are completed in a single visit. Every job is backed by our 90-Day Done Right Promise, so you know it’s done right.
Written by the team at Warmline Insulation Co.